JIS F7312C is the cast steel 5K angle SDNR valve for larger marine lines needing both a pipe turn and combined stop/check operation.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7312C-1996 |
| Type | Cast steel angle screw-down non-return (SDNR) |
| Nominal size | DN50–DN300 |
| Pressure | 5K (0.5 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The guided disc closes automatically on reverse flow and the screw-down stem provides manual isolation. The angle body can eliminate a separate elbow in compact machinery-space piping.
Public catalogues agree on the DN50–DN300 F7312C family, but guide style, trim and dimensional tables vary. Confirm body orientation, flow arrow, handwheel clearance and the project requirements before replacement.
F7312C uses an angle body; F7311C is straight-through. Both combine non-return and manual shut-off functions at 5K.
Public catalogues publish F7312C code entries for the larger sizes, including 750406 and 750407. Check the exact code against DN and the buyer's catalogue revision.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.