JIS F7311C is the cast steel 5K straight SDNR valve, combining automatic non-return action with positive manual shut-off.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7311C-1996 |
| Type | Cast steel straight screw-down non-return (SDNR) |
| Nominal size | DN50–DN300 |
| Pressure | 5K (0.5 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
Forward flow lifts the guided disc; reverse flow closes it, while the handwheel can press the disc onto the seat for isolation. The straight body keeps the route in line on larger marine branches.
Public catalogues agree on the F7311C designation, DN50–DN300 family and cast steel construction. The exact guide, trim and dimensions vary by maker, so state whether the order requires a stem-guide or piston-guide arrangement.
F7311 is the straight globe valve; F7311C adds the screw-down non-return function. Confirm whether automatic backflow protection is required.
F7312C is the 5K angle SDNR pattern. Select it where the pipe route needs a 90-degree change at the valve.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.