JIS F7311 is the cast steel 5K globe valve: the choice where the line is 5K but the medium or the survey rules rule out cast iron - cargo oil, low-temperature service, or a class society requirement for a steel pressure boundary.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7311-1996 |
| Type | Globe, bolted bonnet |
| Nominal size | DN50–DN350 |
| Pressure | 5K (0.5 MPa) |
| Body material | SCPH2 cast steel body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
Cast steel at 5K is not about pressure, it is about material. Impact-tested SCPH2 has a ductility that grey iron does not, so it is what gets specified for deck lines, cargo systems and anything the class society treats as a primary pressure boundary.
The disc and seat are stainless-faced, which also makes the valve usable on slightly more aggressive media than the iron equivalent. Dimensions still follow JIS B2220 5K, so it drops into an existing 5K pipe run.
Material and welding. A steel casting costs more than grey iron and the seat has to be overlaid, so the price gap is in the body, not in the labour.
Yes - CCS, LR, BV, ABS, DNV and ZC inspection can be arranged, issued against the heat number of the casting. Say so on the enquiry so it is quoted in rather than added later.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.