JIS F7310 is the 16K cast-iron angle globe valve, combining the F7310 angle-body layout with the higher JIS pressure class.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7310 |
| Type | Cast iron angle globe valve |
| Nominal size | DN50–DN200 |
| Pressure | 16K (1.6 MPa) |
| Body material | FC200 cast iron body, bronze-faced trim |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
A single angle valve can make the turn that would otherwise need a separate elbow. The bonnet and stem remain accessible for routine inspection.
The 16K rating is a distinct flange class, not a drop-in upgrade for a 5K or 10K valve. Confirm mating dimensions against the ship's approved piping drawing.
Both are 16K cast-iron globe patterns; F7310 is angle-body and F7309 is straight-through.
Globe valves can be used for flow adjustment within their specified service limits. Confirm medium and operating conditions before selection.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.