JIS F7309 is the 16K cast-iron straight globe valve in the F7305/F7307 family, for marine lines whose design calls for the 16K class.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7309 |
| Type | Cast iron straight globe valve |
| Nominal size | DN50–DN200 |
| Pressure | 16K (1.6 MPa) |
| Body material | FC200 cast iron body, bronze-faced trim |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The 16K version serves a higher nominal pressure class than the 5K and 10K variants. Its flange drilling and body dimensions must be checked as a separate pattern.
The globe layout supports shut-off and flow adjustment. For a right-angle connection, use the corresponding angle pattern only after matching the line drawing.
No assumption should be made: 16K and 10K are different flange classes. Check the vessel pipe schedule and mating flange.
Send the standard, DN, pressure class and a photo or drawing of the existing valve flange and face-to-face length.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.