JIS F7308 is the 10K cast-iron angle globe valve: a right-angle flow path for marine service specified to the JIS 10K flange class.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7308 |
| Type | Cast iron angle globe valve |
| Nominal size | DN50–DN400 |
| Pressure | 10K (1.0 MPa) |
| Body material | FC200 cast iron body, bronze-faced trim |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The 10K flange pattern is not interchangeable with 5K. Match the rating and bolt drilling to the line schedule before replacing an installed valve.
Its angle body combines shut-off and a direction change. Where the line is straight, the matching F7307 pattern avoids an unnecessary turn.
Only when the mating flange and pipe class are designed for 10K. Verify the drilling and dimensions against the vessel drawing.
It can simplify a 90-degree pipe run in a restricted space. Check the flow direction marked on the body during installation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.