JIS F7307 is the 10K version of the cast iron globe valve: same body shape as F7305, thicker pressure boundary and a larger bolt circle, for lines that run at up to 1.0 MPa such as boiler feed, hot water and compressed air.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7307-1996 |
| Type | Globe, bolted bonnet |
| Nominal size | DN50–DN350 |
| Pressure | 10K (1.0 MPa) |
| Body material | FC200 grey cast iron body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The step from 5K to 10K is not cosmetic: flange thickness, bolt count and face-to-face all change, so F7305 and F7307 are not interchangeable on the same pipe. That is the single most common ordering mistake on this family and the reason we ask for the old valve's flange dimensions rather than just the DN.
Above DN350 the casting becomes uneconomic in grey iron and the cast steel F7319 takes over. Both are stocked to the same DN steps so a mixed rating order can ship together.
Same design, different body. The bronze-faced disc and the integral seat geometry carry over; what changes is the flange and the wall thickness around the seat.
Yes, JIS B2220 10K counter-flanges, bolts and non-asbestos gaskets can ship with the valves. Ask for them on the same enquiry so they arrive matched to the drilling.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.