JIS F7306 is the 5K cast-iron angle globe valve for marine lines where a 90-degree change of direction is needed at the valve.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7306 |
| Type | Cast iron angle globe valve |
| Nominal size | DN50–DN400 |
| Pressure | 5K (0.5 MPa) |
| Body material | FC200 cast iron body, bronze-faced trim |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The angle body can replace a separate elbow and straight globe valve in a crowded machinery space. The seat and disc remain accessible through the bolted bonnet for inspection.
This is the cast-iron 5K pattern, distinct from the bronze small-bore F7302. Check the existing flange drilling and face-to-face before ordering a replacement.
F7306 turns the flow through 90 degrees; F7305 is the straight-through pattern. Choose by the pipe layout, not by pressure rating.
A globe valve can throttle within its design limits. Check the medium, temperature and operating pressure for the selected trim.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.