JIS F7305 is the workhorse cast iron globe valve of the JIS engine room: 5K, DN50 to DN400, flanged to JIS B2220, used on sea water, fresh water, fuel oil and low-pressure steam where a bronze valve is no longer affordable.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7305-1996 |
| Type | Globe, bolted bonnet |
| Nominal size | DN50–DN400 |
| Pressure | 5K (0.5 MPa) |
| Body material | FC200 grey cast iron body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
Cast iron 5K covers the majority of auxiliary lines. The body is FC200 with a bronze-faced disc, so the seating surfaces are corrosion resistant even though the pressure boundary is iron - the same compromise every Japanese-built engine room makes.
Hydrostatic test on this family is 1.05 MPa on the body and 0.77 MPa on the seat per JIS F7400. If your line runs above that, you want F7307 (10K) rather than a higher-priced special.
Yes, that is its main duty - but the body is cast iron, so it needs the internal coating intact and it is not the right choice for continuously flowing sea water above about 60 °C.
Flange drilling and face-to-face. GB/T 584 uses the GB/T 2501 pattern; F7305 uses JIS B2220. Both are cast iron globes and neither will bolt onto the other's counter-flange.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.