JIS F7303 is the 16K bronze globe valve for the small high-pressure branches - compressed air, hydraulic pilot lines, boiler gauge and sampling connections - where 5K bronze would be under-rated but a steel valve is overkill.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7303-1996 |
| Type | Globe, bolted bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | BC6 cast bronze body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
16K in bronze is a JIS-specific rating: the body wall and the bonnet bolting grow to suit, but the outside dimensions stay small because the sizes stop at DN40. That keeps the valve usable in a tight manifold.
Above DN40 bronze 16K stops being practical - the casting cost and the torque needed on the handwheel both climb. For larger 16K lines use the cast iron F7309 or the cast steel F7313 family instead.
Physically only if the flange drilling matches, and JIS B2220 16K and 20K differ. The safe answer is to keep the rating the line was designed for and match the flange.
The seat is integral with the body, so it is re-lapped rather than replaced. If the seat is badly worn, the valve is replaced - which is why we keep the DN15-DN40 bodies in stock.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.