JIS F7302 is the bronze 5K angle globe valve for shipboard branches where a 90-degree flow turn and manual shut-off are needed in one body.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7302-1996 |
| Type | Bronze angle globe valve |
| Nominal size | DN15–DN65 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 cast bronze body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle pattern can replace a separate elbow and straight valve in restricted machinery-space pipework. Public manufacturer data consistently identifies the bronze 5K family and lists small sizes from DN15 upward.
Published upper-size limits vary by supplier. This listing gives the commonly repeated DN15–DN40 range as the baseline; confirm DN50/DN65 availability and dimensions against the buyer's drawing before quotation.
F7302 is the angle-body version; F7301 is straight-through. Both are bronze globe valves in the 5K family.
Its body turns the flow through 90 degrees, but face-to-face and flange dimensions must match the installed piping arrangement.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.