JIS F7301 is the small bronze globe valve used across ships' fresh water, sea water, oil and steam branches up to 205 °C. It is the default choice below DN65 because the bronze body resists the medium without a coating and the seat can be re-lapped in place.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7301-1997 |
| Type | Globe, union or bolted bonnet |
| Nominal size | DN15–DN65 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 cast bronze body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
Bronze 5K is a low-pressure family: it exists because most engine-room branches do not need more, and because a bronze body will outlast a coated steel one on wet, intermittent duty. The disc is a plug guided in the bonnet, so the valve can also be used for throttling.
Flange drilling follows JIS B2220 5K, which is not interchangeable with the GB/T 2501 pattern used elsewhere on Chinese-built ships. If your line is GB, order the GB/T 587 bronze globe instead - we supply both and will say which one your drawing matches.
Yes, up to 205 °C saturated, which is the limit JIS F7400 sets for this family. Above that the packing and the bronze seat start to give trouble and you want a cast steel valve.
Body material and cost. F7301 stops at DN65 in bronze; from DN50 upwards the cast iron F7305 is normally cheaper and equally durable on non-aggressive media.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.