JIS F7224 is the small duplex oil strainer for compact marine fuel and lubricating-oil lines, allowing one filter side to be cleaned while the other remains available.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7224-1996 |
| Type | Small U type duplex oil strainer |
| Nominal size | DN25–DN40 |
| Pressure | 5K / 10K |
| Body material | FC200 cast iron body and cover, SUS304 filter cylinder |
| Connection | Flanged, JIS 5K / 10K |
| Media | Fuel oil · lubricating oil · compatible service fluids |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, cover | Grey cast iron | FC200 |
| Basket | Stainless steel wire mesh | SUS304 |
| Gasket | Oil-resistant rubber | NBR |
| Drain plug | Brass | C3604 |
The small U-type body is intended for branch and auxiliary lines where a full-size duplex strainer would take too much space. A change-over cock selects the working basket and isolates the basket under maintenance.
Multiple public catalogues agree on DN25–DN40 and 5K/10K variants, while dimensions and weights differ by construction pattern. Confirm flange class, face-to-face length and basket mesh against the project requirements.
The public JIS F7224 listings consistently show DN25, DN32 and DN40; check the exact flange class and body pattern.
Some catalogues list water service, but this product page is positioned for oil filtration. Confirm medium, corrosion compatibility and mesh before using it on seawater.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.