JIS F7220 is the cast-iron Y-strainer family. This reference photo shows a grey cast body and bolted cap; the source page lists DN20-DN50 with JIS 5K/10K options. Check the local F7220Y designation and exact build.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7220 family (local F7220Y suffix to confirm) |
| Type | Y pattern, bolted cap |
| Nominal size | DN20-DN50 source range; photo mark partly legible as 5K50 |
| Pressure | JIS 5K / 10K source family; exact photo rating to confirm |
| Body material | Cast iron body and bonnet; stainless-steel wire gauze per source page |
| Connection | Flanged, JIS 5K / 10K family; verify dimensions against drawing |
| Media | Water · steam · air · gas; confirm service limits from the selected configuration |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, cover | Grey cast iron | FC200 |
| Basket | Stainless steel wire mesh | SUS304 |
| Gasket | Oil-resistant rubber | NBR |
| Drain plug | Brass | C3604 |
The source page identifies a cast-iron body and bonnet with stainless-steel wire gauze, and lists DN20-DN50 for the JIS 5K/10K family. Its standalone product photo shows a grey cast Y-pattern strainer with a bolted cap; a 5K50-style casting mark is partly visible but obscured by glare.
The source page does not state the local suffix F7220Y, and the photo does not conclusively establish pressure class. Check the exact suffix, DN, 5K/10K rating, screen mesh, flange drilling, medium, temperature and test basis against the project requirements and order.
It shows a cast-iron Y-pattern strainer with a bolted cap. The image has a partly legible 5K50-style mark, but the pressure mark is not clear enough to use as a final rating confirmation.
Specify JIS F7220/F7220Y as required, DN, pressure class, medium, temperature, screen mesh and flange details; attach the vessel drawing for confirmation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.