• JIS F7220Q Bronze Y-Strainer - 5K, DN20-DN80,TAILCN Marine Valves,JIS F7220Q Bronze Y-Strainer - 5K, DN20-DN80

JIS F7220Q Bronze Y-Strainer - 5K, DN20-DN80

No.JIS F7220Q-1996
Bronze Y-pattern strainer, bolted bonnet to JIS F7220Q-1996, BC6 bronze body and bonnet; SUS304 stainless-steel strainer, DN20-DN80, JIS 5K, Made in Wenzhou, China.
  • JIS F7220Q Bronze Y-Strainer - 5K, DN20-DN80,TAILCN Marine Valves,JIS F7220Q Bronze Y-Strainer - 5K, DN20-DN80

Description

JIS F7220Q-1996 · Marine strainer

JIS F7220Q is a bronze marine Y-strainer for removing debris from compatible shipboard water and oil lines.

01 · Product details

Product details

Key information for selection. Send your drawing or nameplate photo for an exact match.

ItemValue
StandardJIS F7220Q-1996
TypeBronze Y-pattern strainer, bolted bonnet
Nominal sizeDN20–DN80
PressureJIS 5K
Body materialBC6 bronze body and bonnet; SUS304 stainless-steel strainer
ConnectionFlanged, JIS B2220 5K
MediaProject-specific
Inspection & certificatesJIS 7200-1996 test reference; project inspection scope project-specific

Final configuration is matched to the project requirements before supply.

Materials of main parts

PartMaterialTrademark
Body and bonnetBC6 bronzeBC6 / CAC406
StrainerStainless steelSUS304
Gasket, drain and internal detailsProject-specificPer project requirements
02 · Overview

Product overview

The published 5K size table lists DN20, DN25, DN32, DN40, DN50, DN65 and DN80. The product page specifies BC6 bronze for the body and bonnet, SUS304 stainless steel for the strainer, and a 1.05 MPa body test reference.

The matched physical photo shows a bronze Y-pattern body with a visible BC6 marking and flow arrow. Check the selected DN, flange drilling, mesh, gasket, medium and temperature from the project requirements and filtration duty before ordering.

CARGO SHIPTANKERTUGFISHING VESSELNAVAL AUXILIARYOFFSHORE SUPPLY
03 · Buyer information

Frequently asked questions

What sizes are listed for the 5K version?

The source table lists DN20 through DN80 in seven sizes. Check the exact face-to-face and flange dimensions for the selected size.

What should be specified in an enquiry?

State JIS F7220Q, DN, JIS 5K, medium, temperature, mesh size and required material/test documents.

Is a 10K version available?

The source page says a 10K version is also manufactured, but this photo and table describe the 5K configuration; request a separate drawing for 10K.

Can project inspection be arranged?

The source page gives a JIS 7200 test reference and body test value. Any classification-society inspection, witness point or additional document is agreed for the actual order.

What must be confirmed before ordering?

Confirm DN, flange dimensions, mesh, gasket, medium, temperature and any 10K requirement against the project requirements and filtration duty.