The source identifies a JIS F7209 simplex oil strainer. Its standalone product photo shows a physical vertical can-type strainer with a visible 5K50 marking; check the selected arrangement and internals against the project requirements.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7209 |
| Type | Simplex can-type strainer; physical photo shows vertical body, bolted cover/yoke and drain plug |
| Nominal size | DN50 indicated by visible 5K50 marking; other sizes/layouts to drawing confirmation |
| Pressure | JIS 5K indicated by visible 5K50 marking |
| Body material | Cast-iron appearance with visible FC marking; exact grade and filter-cylinder material project-specific |
| Connection | Flanged; 5K DN50 example shown |
| Media | Oil service identified by source; confirm compatibility and limits for the selected configuration |
| Inspection & certificates | Project-specific |
Final configuration is matched to the project requirements before supply.
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast iron | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The matched photo shows a vertical can body, bolted cover/yoke, side flanges, drain plug and visible FC and 5K50 casting marks. These markings support the photographed 5K DN50 example only; FC depends on an exact cast-iron grade.
The source identifies the JIS F7209 simplex oil-strainer family. S, LA and LB layouts, filter-cylinder material and mesh, other DN sizes, temperature, working pressure and inspection records must be confirmed from the drawing and filtration duty before quotation.
A physical single-can strainer with bolted cover/yoke, drain plug and visible FC and 5K50 marks. The photo depends on exact material grade, mesh or other sizes.
State JIS F7209, layout, DN, pressure class, medium, temperature, filter mesh, drain arrangement and required material/test documents.
No. It supports the visible single-can form and 5K50/FC markings. Check the exact body grade, screen, mesh, layout and dimensions against the project requirements.
Agree the required drawing, material records, test records and any project inspection scope for the selected order.