JIS F7208 is the H-type cast-iron duplex oil strainer for marine fuel and lubricating-oil lines, with two filter chambers that can be changed over during maintenance.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7208-2005 |
| Type | H type duplex oil strainer, twin basket |
| Nominal size | DN40–DN200 |
| Pressure | 5K / 10K |
| Body material | FC200 cast iron body and cover, SUS304/SUS316 filter mesh |
| Connection | Flanged, JIS 5K / 10K |
| Media | Fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, cover | Grey cast iron | FC200 |
| Basket | Stainless steel wire mesh | SUS304 |
| Gasket | Oil-resistant rubber | NBR |
| Drain plug | Brass | C3604 |
The duplex arrangement keeps filtration available while one basket is opened and cleaned. Stainless filter mesh and drain or air points support routine inspection in engine-room oil systems.
Public catalogues list 5K/10K options and size ranges that vary by H-type layout, commonly from DN40 to DN200. Check the exact body pattern, face-to-face dimensions, mesh and working pressure before ordering.
It is a duplex strainer layout with two filter chambers and a change-over mechanism; the exact port geometry must be checked against the drawing.
Yes, mesh is normally selected from the required particle size and pressure-drop limit. State the target mesh or filtration duty in the RFQ.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.