JIS F7202 is the larger U-type duplex oil strainer for marine fuel and lubricating-oil lines where filtration must continue during basket cleaning.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7202-1978 |
| Type | U type duplex oil strainer, twin basket |
| Nominal size | DN50–DN125 |
| Pressure | 5K / max. working pressure project-specific |
| Body material | FC200 cast iron body and cover, stainless filter cylinder |
| Connection | Flanged, JIS 5K |
| Media | Fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, cover | Grey cast iron | FC200 |
| Basket | Stainless steel wire mesh | SUS304 |
| Gasket | Oil-resistant rubber | NBR |
| Drain plug | Brass | C3604 |
Two filter chambers are connected through a change-over arrangement. One side can remain in service while the other side is isolated, vented and cleaned, reducing the need to stop the oil system.
Public catalogues commonly list DN50–DN125, cast iron construction and JIS 5K flanges. Mesh, gasket, temperature and maximum working pressure must be selected from the oil system data before quotation.
A duplex body allows the flow to be changed to the clean chamber while the isolated basket is serviced.
State DN, JIS 5K or 10K flange class, oil type and temperature, mesh, gasket material and required test documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.