JIS F7121S 5K is the cast-iron marine seawater filter shown in Taler's customer product catalogue. The product is kept separate from other JIS F7121 filter patterns because the source identifies the S suffix and seawater duty.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7121S |
| Type | Marine seawater filter |
| Nominal size | Project-specific |
| Pressure | 5K |
| Body material | Cast iron body; exact grade project-specific |
| Connection | Project-specific |
| Media | Sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast iron | Exact grade project-specific |
| Filter element and gasket | Project-specific | Per project requirements |
The source title confirms the JIS F7121S designation, 5K class, cast-iron construction and seawater service. It does not check the nominal size, mesh, flange drilling, gasket or drain details, so those fields require the buyer's drawing or order requirements.
For replacement or newbuilding supply, send the filter body photograph, nameplate or approved piping drawing. We check the cover arrangement, element specification, connection and inspection scope before quotation.
Yes. The source identifies JIS F7121S rather than a generic JIS F7121 filter. Keep the suffix in the enquiry and check the exact pattern from the drawing.
No. Mesh and filtration duty are not stated in the source title. Provide the required particle size, flow, medium and pressure-drop limit for selection.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.