JIS F7121 is the can water filter: the coarse, high-capacity strainer fitted on sea water and fresh water headers ahead of coolers, pumps and heat exchangers, where the debris load is heavy and the line runs continuously.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7121 |
| Type | Can type water filter, bolted cover (S / LA / LB) |
| Nominal size | DN50–DN300 |
| Pressure | 5K / 10K |
| Body material | FC200 grey cast iron body and cover |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, cover | Grey cast iron | FC200 |
| Basket | Stainless steel wire mesh | SUS304 |
| Gasket | Oil-resistant rubber | NBR |
| Drain plug | Brass | C3604 |
It is deliberately coarse. The job is to stop shells, scale and welding slag before they reach a cooler tube bundle - not to polish the water. Dirt capacity and a low pressure drop matter more than mesh fineness.
The body is the same family as F7209 but sized for water duty with a larger drain. Cover bolting is arranged so the basket can be lifted out vertically by one person.
Yes - tapping points on both sides of the basket can be fitted so a gauge or a switch tells you when to clean. Useful on continuously running sea water lines.
Same can-type construction, different duty and detail: F7121 is the water filter with the larger drain, F7209 the oil-side simplex strainer. Do not mix them on an oil line.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.