JIS F3060 is the storm valve that can be shut and locked: a screwdown stem presses the flap onto its seat so the overboard opening is positively closed, which is what a surveyor asks for when the ship is in port or the line has to be isolated.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F3060-1996 |
| Type | Vertical, screwdown (flap can be locked shut) |
| Nominal size | DN50–DN200 |
| Pressure | 5K / 10K |
| Body material | SCPH2 cast steel body and bonnet, bronze disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
A plain storm valve only closes against reverse flow - it cannot be made tight when there is no back pressure. F3060 adds a stem and handwheel: wind it down and the flap is held on the seat mechanically, independent of sea state.
That makes it the pattern for lines that must be isolated for inspection, tank cleaning or repair, and for discharges below the waterline. IMPA codes run 754241 to 754247 across DN50 to DN200 in both 5K and 10K.
IMPA lists the size and pattern, not the rating. Quote the rating with the code - 754241 is DN50 either way, but the 10K body has a thicker flange and a different bolt circle.
Yes. Wind the stem fully up and the flap swings free as a normal non-return valve. Add a padlockable handwheel or a deck stand if the position has to be secured.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.