JIS F3058 is the cast steel vertical storm valve for the larger overboard and deck drain lines where a bronze body is no longer economic. The flap is bronze with a rubber face, closing against a seat machined into the body.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F3058-1996 |
| Type | Vertical, gravity flap |
| Nominal size | DN50–DN200 |
| Pressure | 5K / 10K |
| Body material | SCPH2 cast steel body, bronze disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The steel body is the reason this pattern exists: above roughly DN150 the bronze casting cost climbs faster than the steel one, while the duty - sea water at the hull, low pressure, no continuous flow - does not need bronze wall thickness.
Internally the geometry matches F3057, so a ship can carry one spare flap size across both patterns. Anti-corrosion coating is applied inside and out; where the discharge is aggressive we can supply the flap in SCS2 instead of bronze.
No - the 10K flange is thicker and the bolt circle larger, so the body grows with it. Tell us the rating you are matching and we quote the correct casting rather than a 5K body with 10K drilling.
No. The flap is the non-return element. Adding a second check valve in series only adds a pressure loss and another leak path.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.