GB/T590 Type B / BS is a cast iron flanged marine globe valve shown in Taler's customer product catalogue. It remains a separate procurement identity from Type A / AS until the approved body and connection arrangement is confirmed.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T590 |
| Type | Type B / BS cast iron flanged globe valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast iron body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, ballast or compatible low-to-moderate duty service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast iron | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a cast iron flanged globe-valve body with a handwheel and rising-stem assembly. The source title confirms GB/T590 and Type B/BS, but depends on the nominal size, pressure class, exact cast-iron grade, trim or dimensions.
Provide the old valve photograph or drawing, mating flange, medium, temperature and inspection requirement. We check the Type B/BS pattern and documents before quotation.
Do not assume direct interchangeability. Match the standard type, flange pattern, face-to-face length, pressure class and project requirements.
State GB/T590 Type B/BS, nominal size, pressure class, flange drilling, face-to-face length, medium, temperature and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.