GB/T589 Type A / AS is a bronze flanged marine check valve shown in Taler's customer product catalogue. It is selected for automatic reverse-flow protection, with the exact Type A or AS arrangement confirmed against the drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T589 |
| Type | Type A / AS bronze flanged check valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Bronze body; exact disc and seat materials project-specific |
| Connection | Flanged ends; flange drilling project-specific |
| Media | Marine water, ballast, oil or compatible fluid service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Bronze | Exact grade project-specific |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title confirms GB/T589, a bronze flanged check-valve family and the Type A/AS variants. The photograph does not check the disc mechanism, nominal size, pressure class, flange drilling or trim.
Provide the flow direction, old valve photograph, mating flange dimensions and medium. We match the check mechanism and inspection scope before quotation.
The source lists both variants but does not provide enough detail to infer their internal or connection differences. Keep the exact type on the enquiry and confirm it from the project requirements.
A check valve normally closes automatically on reverse flow, but the exact mechanism and installation orientation must be confirmed for the selected GB/T589 type.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.