GB/T587-2008 is the national standard for flanged bronze globe valves — the general-purpose shut-off and throttling valve on board. B is the straight-through body, BS the angle body for a corner in the line.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T587-2008 |
| Type | B · BS |
| Nominal size | DN10–DN100 |
| Pressure | 0.2 MPa (0.4 MPa on request) |
| Body material | ZCuSn10Zn2 cast tin bronze |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · steam · oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze, renewable | ZCuSn10Zn2 |
| Stem | Tin brass, rolled thread | HSn62-1 |
| Seat | Integral bronze seat | ZCuSn10Zn2 |
| Packing | PTFE impregnated asbestos-free | — |
The globe valve is the one valve that throttles properly: flow passes two changes of direction across the seat, which costs pressure drop but gives fine control. That is why it is used on cooler bypasses, gauge lines and feed lines rather than on long main runs.
Bodies are cast tin bronze with a bolted bonnet so the gasket can be renewed and the disc and seat inspected without cutting the pipe. The stem is rolled tin brass with a back seat that allows packing replacement with the valve open.
Angle only pays off when the pipe actually turns a corner at the valve. If it does, BS saves two flanges and an elbow; if it does not, use B — an angle body in a straight run adds a needless bend.
Yes, within the bronze temperature limit (about 200 °C saturated). Above that, or on superheated steam, specify a cast steel valve.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.