GB/T584 Type B / BS is a cast steel flanged marine globe valve shown in Taler's customer product catalogue. The Type B / BS identity is kept separate from Type A / AS until the approved body and connection arrangement is matched.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T584 |
| Type | Type B / BS cast steel flanged globe valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast steel body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, oil, steam or compatible service; confirm actual medium and temperature |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast steel | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a cast steel flanged globe-valve body with a handwheel and rising-stem assembly. The source title confirms GB/T584 and Type B/BS, but does not state the nominal size, pressure class, steel grade, trim or face-to-face dimension.
Provide the old valve photograph or drawing, mating flange, medium, temperature and inspection scope. We verify the Type B/BS pattern before quotation.
The source lists separate type families, but the exact distinction must be taken from the standard drawing and the customer's valve record. Do not infer interchangeability from appearance.
State GB/T584 Type B/BS, nominal size, pressure class, flange drilling, face-to-face length, medium, temperature and document requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.