GB/T584 Type A / AS is a cast steel flanged marine globe valve shown in Taler's customer product catalogue. It is selected for larger marine line isolation or control where the Type A/AS arrangement matches the approved piping drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T584 |
| Type | Type A / AS cast steel flanged globe valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast steel body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, oil, steam or compatible service; confirm actual medium and temperature |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast steel | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a cast steel flanged globe-valve body with a handwheel and rising-stem assembly. The source title confirms GB/T584 and Type A/AS, but not the nominal size, pressure class, steel grade, trim or face-to-face dimension.
Send the line drawing, old valve photograph, flange dimensions, medium and temperature. We check the body pattern, trim, test scope and class documents before quotation.
No. Type, pressure class, flange drilling, face-to-face length, trim and service conditions must all match the drawing.
A globe valve can provide controlled closure, but the allowable service and trim depend on the medium, temperature, pressure class and approved design.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.