GB/T5744 Type A is listed as a manual marine quick-closing valve in Taler's customer catalogue. Check the valve size, connection and closure arrangement against the vessel's project requirements.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T5744 |
| Type | Type A manual quick-closing valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged ends; drilling and dimensions project-specific |
| Media | Marine fuel or service line; exact medium and emergency duty project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the GB/T5744 Type A manual quick-closing-valve family. The product image shows a flanged valve with a spring-loaded operating assembly and a side lever; it depends on the nominal size, pressure class, material grade or remote-release details.
Provide the protected line or tank, medium, temperature, required closing arrangement, flange dimensions and inspection scope. We match the Type A mechanism and installation clearances before quotation.
It is identified as a quick-closing valve. Do not substitute it with an ordinary isolation valve without checking the required emergency closure function.
State GB/T5744 Type A, nominal size, pressure class, connection, medium, operating arrangement and required test documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.