GB/T3037-94C is the manually geared double-offset butterfly valve: metal seat, offset disc, self-locking worm gearbox and handwheel. The pattern for a hot line that is worked by hand and left in position.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3037-94C |
| Type | C · double offset, worm gear |
| Nominal size | DN80–DN800 |
| Pressure | 1.0 / 1.6 MPa |
| Body material | HT200 / ZG230-450 body, stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · cargo oil · steam · hot water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron / cast steel | HT200 / ZG230-450 |
| Disc | Stainless steel | 1Cr18Ni9Ti / 2Cr13 |
| Seat | Metal seat with flexible graphite | Stellite faced on request |
| Stem, packing | Stainless steel / PTFE | 2Cr13 |
Because the disc leaves the seat before it turns, the operating torque is dominated by the packing and the gearbox rather than by seat friction — which is why a manual gearbox remains practical up to DN800 on this pattern.
The gearbox is self-locking, so no separate locking device is needed to hold a part-open position. An extension spindle brings the handwheel out to the walkway where the valve is below the floor plates.
About DN800 for occasional operation. Beyond that, or if the valve is worked daily, an actuator pays for itself in effort and in stem life.
Yes, the gearbox indexes in four positions on the ISO top flange, and an extension spindle can move the handwheel up to about 3 m away.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.