GB/T3037-94 with a hydraulic actuator: the double-offset metal-seated body driven from the ship's hydraulic system, for large hot or high-pressure valves that must be operated remotely with high torque.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3037-94 |
| Type | C · double offset, hydraulic |
| Nominal size | DN100–DN800 |
| Pressure | 1.0 / 1.6 MPa |
| Body material | HT200 / ZG230-450 body, stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · cargo oil · hot water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron / cast steel | HT200 / ZG230-450 |
| Disc | Stainless steel | 1Cr18Ni9Ti / 2Cr13 |
| Seat | Metal seat with flexible graphite | Stellite faced on request |
| Stem, packing | Stainless steel / PTFE | 2Cr13 |
A metal seat at DN600 on a 1.6 MPa line needs several thousand newton-metres; a hydraulic cylinder delivers that in a package far smaller than any electric actuator, which is the reason this combination is used on cargo and ballast mains.
A hand pump or an accumulator can be included for operation with the power pack down, and a position transmitter gives the control system the disc angle.
Normally 60–120 bar from the ship's system. Tell us the available pressure and we size the cylinder to suit rather than assuming.
Yes, with a spring-return or accumulator arrangement; state the requirement, because it changes the cylinder and the valve envelope.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.