GB/T3037-94 D pairs the double-offset metal-seated body with a quarter-turn electric actuator — for a hot or high-pressure line that has to be worked from a control station without an air supply.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3037-94 |
| Type | D · double offset, electric |
| Nominal size | DN80–DN800 |
| Pressure | 1.0 / 1.6 MPa |
| Body material | HT200 / ZG230-450 body, stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · cargo oil · hot water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron / cast steel | HT200 / ZG230-450 |
| Disc | Stainless steel | 1Cr18Ni9Ti / 2Cr13 |
| Seat | Metal seat with flexible graphite | Stellite faced on request |
| Stem, packing | Stainless steel / PTFE | 2Cr13 |
Higher torque is the cost of a metal seat, and it is why the electric actuator on this pattern is a bigger unit than the one on a concentric valve of the same DN. We size it from the measured torque curve of the valve, with a margin for fouling.
Travel and torque limits are set at our works; the actuator keeps its last position on power loss and can be declutched for manual operation with a handwheel.
Yes, provided the valve is ordered with the standard ISO top flange and a stem that suits a keyed coupling — say so on the order and we prepare it.
Typically 15–30 s for a quarter turn on a standard actuator; faster units are available for emergency closure, with the time proven on test.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.