GB/T3036 FFCS is the double-flanged spool pattern: both flanges are part of the body, so the valve can be bolted to a pipe end and still hold pressure with nothing on the far side — the arrangement used for a dead-end or a manifold take-off.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036 |
| Type | FFCS · flanged spool, gear |
| Nominal size | DN80–DN600 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · cargo oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
A wafer valve is clamped between two counter-flanges and needs both to hold; a spool body carries its own flanges and can dead-end. That is the difference that decides between this pattern and the FC type on a manifold header.
Threaded bosses on the body allow a drain or a gauge to be fitted without drilling, and the gearbox mounts on the standard top flange as on the FC pattern.
When one side of the valve can be opened to atmosphere — a manifold branch, a tank outlet or any dead-end. A wafer body has no flange of its own and cannot hold that condition.
Yes, roughly one flange thickness longer than the wafer pattern; check the valve station length before you specify.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.