GB/T3036 FC is the gear-operated flanged butterfly valve for manifold headers: a self-locking gearbox lets one person work a DN400 valve, and the gearbox can be indexed to any of four positions so the handwheel faces the walkway whatever the pipe run does.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036 |
| Type | FC · flanged body, worm gear |
| Nominal size | DN80–DN600 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · fuel oil · cargo oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
FC is the pattern we quote when a valve station has to be built from stock parts: flanged body, resilient seat, standard ISO top flange, bolt-on gearbox. Nothing on it is special, which is why it can be on a ship in weeks rather than months.
The gearbox takes the side load off the stem — that is the load that eventually wears a lever-operated large valve. It also means the handwheel can be arranged for the space rather than the pipe.
Three to four turns for a 90° quarter-turn through the standard ratio. If you need faster operation, a spur-gear or pneumatic actuator is the better choice.
Yes. The gearbox bolts to a standard ISO top flange; it comes off with four bolts and the stem stays in the body.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.