GB/T3036-94 FA is the flanged, lever-operated concentric butterfly valve: a centre-line disc with a resilient seat, turned by a notched lever that holds any of ten positions. The everyday isolating valve for sea water and ballast lines.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036-94 |
| Type | FA · flanged body, lever |
| Nominal size | DN50–DN500 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · ballast · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
The concentric (centre-line) disc seats on a rubber or PTFE liner, so it closes bubble-tight against a soft face rather than metal to metal. That is what makes it the cheapest fully tight valve per DN — and why it is not used above about 80 °C on a resilient seat.
The lever has ten detent positions, so it doubles as a crude balancing device: the crew can set a branch to a repeatable part-open position instead of guessing. Flanged body, short face-to-face, so it drops into a standard valve station.
Gear. Above about DN200 the seating torque is beyond a comfortable one-hand pull, and a lever that has to be forced is how stems get bent.
NBR about 80 °C, EPDM about 120 °C, PTFE about 180 °C. Above that use the double-offset metal seat pattern (GB/T3037).
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.