GB/T3036-94 D is the pneumatically actuated concentric butterfly valve: a rack-and-pinion actuator on the standard top flange, driven by 4–8 bar instrument air, with solenoid pilot valve and limit switches for remote indication.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036-94 |
| Type | D · pneumatic double-acting / spring return |
| Nominal size | DN50–DN500 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · cargo oil · air |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
Pneumatic actuation is chosen where the valve must move fast or from a control room: cargo valve consoles, ballast remote systems, quick-closing fuel lines. A quarter-turn takes about two seconds on a double-acting actuator.
Spring-return versions fail to a set position on air loss — normally closed on a fuel line, normally open on a cooling line. State the fail position on the order; it is built into the actuator and cannot be changed on board.
Whatever is safe on air loss: closed on a fuel or cargo line, open on a cooling water line. It is decided by the system, not by the valve, so give us the requirement.
Yes — a manual override (declutchable gear or a top handwheel) can be fitted; state it on the order because it changes the actuator height.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.