GB/T3036-94 C is the manual worm-gear pattern: handwheel, self-locking gearbox, concentric disc on a resilient seat. The workhorse isolating valve for large sea water and cargo lines where no actuator is wanted.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036-94 |
| Type | C · worm gear, handwheel |
| Nominal size | DN80–DN600 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · cargo oil · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
Compared with the lever pattern, the gearbox removes the need to reach the valve: the handwheel can be brought out to a walkway with an extension spindle, so a DN500 valve under the floor plates is still operable.
The self-locking worm holds the disc at any angle, so the valve can be used for rough balancing without a separate locking device. The gearbox mounts on the standard ISO top flange and can be indexed in four positions.
Yes — extension spindle with a floor stand or a bulkhead bracket, up to about 3 m; beyond that the spindle needs an intermediate bearing.
Yes, a chain wheel on the gearbox input is the usual answer for a valve above head height.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.