GB/T3036-94 C with an electric quarter-turn actuator: motor-driven, self-locking, with a declutchable manual override and 4–20 mA or switch position feedback for the cargo or ballast control system.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036-94 |
| Type | C · electric actuator |
| Nominal size | DN50–DN600 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · cargo oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
Electric actuation is used where air is not available or the run is long: the actuator needs only a power cable, not an air line and a dryer. Typical supply on board is 380/440 V three phase or 24 V DC for a control-system valve.
The actuator is set for travel limits and torque at our works and labelled with the setting; it keeps its position on power loss, which is what you want on a cargo line but not on a cooling line that must fail open.
IP67 minimum for a pump room, IP68 if it can be washed down or flooded. State the enclosure and we match the actuator to it.
Not necessarily — a local control station with open/stop/close and a position indicator is enough for most installations; integrate into the ship's system via the feedback contacts.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.