GB/T3036-94 B uses a plain handwheel on a screwed stem rather than a lever or a gearbox — the simplest operated pattern in the standard, and the one that suits a valve worked occasionally and left in position.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T3036-94 |
| Type | B · handwheel with screw |
| Nominal size | DN50–DN400 |
| Pressure | 0.6 / 1.0 MPa |
| Body material | HT200 cast iron body, bronze or stainless disc |
| Connection | Flanged, both ends |
| Media | Sea water · ballast · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Cast iron | HT200 |
| Disc | Nodular iron, nylon coated / bronze | QT450-10 / ZCuSn10Zn2 |
| Stem | Stainless steel | 2Cr13 |
| Seat | Bonded rubber / PTFE | NBR / EPDM / PTFE |
Without a gearbox the handwheel turns a threaded stem that drives the disc quadrant. It gives fine, gradual movement — useful when a line has to be opened slowly against pressure — and the screw holds the position without a separate lock.
The trade-off is turns: about twelve to fourteen for a quarter turn, which is why the pattern stops being sensible above DN400. Below that it is cheaper than a gearbox and just as reliable.
Slow, gradual opening and a position that stays put. On a line where a fast quarter-turn would cause water hammer, the screw pattern is the cheaper answer than an actuated valve.
Around twelve to fourteen for the quarter turn, depending on size; the stem is back-seated so the packing can be renewed in service.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.