GB/T2499-93 R/RS is the double-row two-valve globe chest — the most compact chest in the range, with both valves on one body and their flanges on opposite faces.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T2499-93 |
| Type | R · RS (with drain) |
| Nominal size | DN15–DN50 branches |
| Pressure | 0.2 MPa |
| Body material | HT200 cast iron body, bronze trim |
| Connection | Flanged, both ends |
| Media | Bilge water · ballast water · sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Chest body | Cast iron | HT200 |
| Bonnet | Cast iron | HT200 |
| Disc | Cast iron with bronze facing | HT200 / ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Gasket | Rubber bonded fibre | — |
Used on short branch runs where a single-row chest would foul the adjacent structure, and where only two branches have to be controlled. Both valves can be worked from the same side.
R is plain, RS carrries the drain tapping. The casting is the same casting family as the three-valve chest, so spares are common.
Same flange pattern and face-to-face per branch; the overall length is shorter because there is one branch fewer.
Yes, a self-closing (spring-return) globe valve can be fitted in one position on request — that is the usual arrangement for a sounding or gauge branch.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.