GB/T2499-93 S/SS is the double-row three-valve globe chest: the valves are arranged in two rows so the handwheels sit closer together and the assembly fits a narrower floor plate space than a single-row chest of the same capacity.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T2499-93 |
| Type | S · SS (with drain) |
| Nominal size | DN15–DN50 branches |
| Pressure | 0.2 MPa |
| Body material | HT200 cast iron body, bronze trim |
| Connection | Flanged, both ends |
| Media | Bilge water · ballast water · sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Chest body | Cast iron | HT200 |
| Bonnet | Cast iron | HT200 |
| Disc | Cast iron with bronze facing | HT200 / ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Gasket | Rubber bonded fibre | — |
Two rows means the branch flanges come off both faces of the body instead of one, which halves the length of the chest. On a refit where the manifold has to sit between existing frames that difference is often what makes the job possible.
S is plain, SS adds the drain. Globe discs are bronze-faced iron, seats integral, and each bonnet can be removed on its own.
Double row when the available length is short and the width is not; single row when the chest sits against a bulkhead and only one face is accessible.
No — the handwheels are offset in the casting so they can be turned independently, and each stem is back-seated.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.