This GB/T2031 Type B connector is listed for a marine water-hose fire connection. Verify the hose coupling, size and fire-main pressure before ordering.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T2031 |
| Type | Type B water-hose fire connector |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine fire-main water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
Type B is a distinct catalogue identity from the GB/T2031 Type A internal-thread connector. The source title identifies a water-hose connection, while the actual coupling dimensions, pressure and materials require confirmation.
Provide the standard edition, hose coupling, nominal size, fire-main pressure, material requirement, cap or seal details and required class or inspection documents. Match the connector to the vessel's existing fire equipment.
Not without checking the interface. Type B is listed as a water-hose connector; check the hose-side coupling and installed arrangement.
Send the standard edition, hose coupling, nominal size, working pressure, materials and required inspection documents.
State the hydrant or hose-valve standard, inlet flange, outlet coupling, nominal size, pressure class, medium and required inspection documents.
Only after the approved fire-main drawing and coupling standard are checked. Do not assume that two visually similar outlets are interchangeable.