This GB/T2031 Type A fire connector is listed with an internal-thread interface. Check the thread form, size and mating hose coupling before fitting it to a vessel fire main.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T2031 |
| Type | Type A internal-thread fire connector |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Internal thread; thread form and size project-specific |
| Media | Marine fire-main water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
A fire connector is only compatible when its thread and hose-side interface match the vessel equipment. The source title identifies Type A and an internal thread; it does not confirm thread dimensions, pressure rating or material grade.
Provide the applicable GB/T2031 edition, thread designation, hose coupling, fire-main pressure, medium, material requirement and class documentation. Confirm pressure testing and marking against the purchase specification.
No. The source title identifies the type and internal-thread form, but the thread designation and size must be confirmed.
Send the standard edition, thread details, mating coupling, nominal size, working pressure and required inspection documents.
State the hydrant or hose-valve standard, inlet flange, outlet coupling, nominal size, pressure class, medium and required inspection documents.
Only after the approved fire-main drawing and coupling standard are checked. Do not assume that two visually similar outlets are interchangeable.