GB/T1855-93 R/RS is the two-valve globe-check chest: two branches, each with a handwheel and a built-in non-return element, on a single cast iron body.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T1855-93 |
| Type | R · RS (with drain) |
| Nominal size | DN15–DN50 branches |
| Pressure | 0.2 MPa |
| Body material | HT200 cast iron body, bronze trim |
| Connection | Flanged, both ends |
| Media | Bilge water · ballast water · sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Chest body | Cast iron | HT200 |
| Bonnet | Cast iron | HT200 |
| Disc | Cast iron with bronze facing | HT200 / ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Gasket | Rubber bonded fibre | — |
This is the chest specified when a two-branch manifold has to be protected against backflow but there is no room for separate check valves — a common constraint in the steering gear flat or under the engine room floor plates.
R is the plain pattern, RS adds the drain tapping so the body can be emptied before a bonnet is opened. All internal parts are bronze or bronze-faced iron.
Not from the standard casting — both branches are the same DN. For mixed sizes we machine a special body; send the drawing.
Yes, on the same pattern, in ZCuSn10Zn2, for lines where cast iron is not accepted.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.