GB/T12522 is listed for a stainless-steel corrugated expansion joint in Taler's customer catalogue. Select the bellows configuration from the piping movement, pressure and temperature requirements.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T12522 |
| Type | Stainless-steel corrugated expansion joint |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged ends; standard and dimensions project-specific |
| Media | Marine piping movement compensation; system medium and operating envelope project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the GB/T12522 corrugated expansion-joint family and stainless-steel construction. The product image shows a multi-ply-looking bellows section between flanges with external tie rods; it depends on ply count, movement capacity, pressure rating or exact stainless grade.
Provide nominal size, design pressure and temperature, axial/lateral movement, cycle requirement, anchor and guide arrangement, medium and flange standard. We review the piping layout before selecting the bellows configuration.
Not without checking anchors, guides, movement direction, pressure thrust and installation length against the piping design.
State GB/T12522, size, pressure, temperature, movement, cycles, medium, flange details, liner and tie-rod requirements.
State nominal size, pressure, temperature, movement, medium, end connection, material and the required approval scope.
No. Movement, pressure, temperature, fatigue duty and connection dimensions must also be checked.