GB/T1241 Type A is an external-thread forged-steel stop-check valve listed in Taler's customer catalogue. Check the thread, size and pressure class against the installed line before replacement.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB/T1241 |
| Type | Type A forged-steel external-thread stop-check valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Forged steel; exact grade, trim and sealing materials project-specific |
| Connection | External-threaded ends; thread form project-specific |
| Media | Marine instrument, service-water, oil or compatible small-bore line; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The customer source identifies the GB/T1241 Type A family, forged-steel construction and external-thread connection. The product image shows a compact right-angle valve with a handwheel and two threaded ends; it depends on thread standard, nominal size, pressure rating or exact material grade.
Send the nameplate or old-valve photograph together with the pipe thread, medium, temperature and required documents. We match the stop and non-return arrangement to the project requirements before quotation.
The product is listed as a stop-check pattern, but the exact operating and non-return arrangement must be verified against the GB/T1241 Type A drawing.
Provide the nominal size, thread form, pressure class, medium, temperature, installation orientation and inspection requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.