GB11692-1989 is the cast bronze suction sea valve mounted directly on the shell plating — the ship's sea water inlet. Bronze body, rising stem and bolted bonnet, with a strainer face so debris cannot reach the pump.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | GB11692-1989 |
| Type | Suction, shell-mounted |
| Nominal size | DN50–DN400 |
| Pressure | 0.2 MPa |
| Body material | ZCuSn10Zn2 cast tin bronze body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze | ZCuSn10Zn2 |
| Stem | Tin brass / bronze | HSn62-1 / ZCuSn10Zn2 |
| Strainer plate | Cast tin bronze | ZCuSn10Zn2 |
| Packing | PTFE braided, aramid-free | — |
This is the valve that decides how long a sea water system stays reliable: it lives in the most corrosive position on the ship and it is the one nobody wants to renew in dry dock. A bronze body has no coating to fail and no corrosion allowance to monitor.
The valve bolts to the shell pad or to a sea chest; the strainer face is either cast into the body or fitted as a separate bronze plate. Rising stem with a back seat allows the packing to be renewed with the valve open and the ship afloat.
Yes — the valve and the chest pad are usually ordered together so the flange drilling and the spigot match. Send the shell drawing.
Up to about DN400. Beyond that the casting cost climbs sharply and most yards move to a cast steel body with a bronze trim; we will quote both.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.