CB/T907 is listed as an external-threaded bronze right-angle liquid safety valve. Check the set pressure, thread details, medium and discharge arrangement before selection.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T907 |
| Type | Right-angle liquid safety valve, external thread |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Bronze body; alloy, spring and seat materials project-specific |
| Connection | External thread; thread form and size project-specific |
| Media | Marine liquid service; specify the protected system and medium |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Bronze | Exact grade project-specific |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title establishes the standard family, bronze body, external-thread connection and right-angle form. It depends on the set pressure, orifice, capacity, exact alloy or thread designation.
Provide the protected system, liquid medium, normal and maximum pressure, required set pressure, relieving capacity, thread form and size, outlet routing and inspection scope. Set pressure and test documentation must match the approved order.
No. The required set pressure depends on the protected system and must be stated in the approved specification.
Provide medium, normal and maximum pressure, set pressure, relieving capacity, thread details, outlet routing and required test documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.