CB/T601 is listed as a self-closing relief valve in Taler's customer catalogue. Its set pressure, connection and functional-test requirements must be specified from the protected system design.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T601 |
| Type | Self-closing relief valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged ends; drilling and dimensions project-specific |
| Media | Protected marine equipment or piping system; exact medium and duty project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the CB/T601 self-closing relief-valve family. The product image shows a flanged body with a spring-loaded upper assembly and lever; it depends on the set pressure, relief capacity, materials or reset behavior.
Provide the protected equipment, medium, operating temperature, required set pressure, flow capacity, connection dimensions and inspection documents. We check the relief duty and test scope against the approved specification before quotation.
No. The required set pressure and capacity must come from the protected-system design and approved documents.
State CB/T601, set pressure, required capacity, medium, temperature, connection, reset requirements and test-document scope.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.