CB/T497 is listed as a marine coarse water filter in Taler's customer catalogue. Check the screen area, pressure class and connection dimensions from the cooling, ballast or service-water system.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T497 |
| Type | Coarse water filter |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged ends; drilling and drain arrangement project-specific |
| Media | Marine cooling, ballast or service-water filtration; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the CB/T497 coarse-water-filter family. The product image shows a flanged cylindrical filter body with a bolted cover and drain or inspection fitting; it depends on screen mesh, filter area, pressure class, body material or allowable differential pressure.
Provide the water medium, flow, pressure, temperature, required filtration grade, flange drilling, cleaning clearance and inspection scope. We match the filter configuration to the approved piping arrangement.
No. The source title describes the service class, but the screen mesh and effective area must be confirmed for the actual water system.
State CB/T497, nominal size, flow, pressure, temperature, filtration grade, flange drilling, drain arrangement and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.