CB/T466 is a flanged cast-steel marine gate valve shown in Taler's customer product catalogue. The product is intended as an isolation identity, with pressure class and trim matched to the approved piping drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T466 |
| Type | Flanged cast steel gate valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast steel body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, ballast, fuel or compatible service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast steel | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The the listed model indicates the CB/T466 family, cast-steel body and flanged gate-valve form. The product image shows a handwheel-operated body, but does not check the nominal size, pressure rating, steel grade, flange drilling or face-to-face dimension.
Provide the valve nameplate, mating flange, medium, temperature and drawing. We verify the wedge, trim, operating clearance and inspection documents before quotation.
A gate valve is normally used fully open or fully shut. Use a globe, butterfly or control valve where the design requires throttling.
Match CB/T466, nominal size, pressure class, flange drilling, face-to-face length, medium, temperature and trim requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.